Comdel CDX 6000
Dual Process Energy Generator 

  
NOTE: Required DC Power Source not pictured.

 

The Ultimate in Power Versatility!

Comdel combines a DC generator with an RF generator to create one compact, versatile power supply ideal for plasma, flat panel, IC, and storage media applications. The CDX 6000 offers ease of control, small physical size, and the ability to withstand large changes of load impedance without failure or premature foldback.

The DC section provides up to 2KW of programmable power, while the RF section can deliver up to 4 KW fixed frequency or variable frequencies ranging from 20KHz to 2 MHz, as well as an optional phase locked output eliminating the need for a matching network in many systems. 

Sharing a common cooling system and DC power source, the CDX 6000 simplifies facility requirements and reduces spare parts inventory.  Each section responds to completely separate remote control commands. 

The dual control board performs many functions, including:   Pulse-width power control; protection circuitry; system status indicators; power metering; remote interface; and protection circuitry. 

Features: 

  • Compact design reduces space, service (electrical and plumbing) and spare inventory requirements
  • Rugged, solid-state construction for years of trouble-free operation
  • Protection circuits safeguard the amplifiers from over-voltage, over-current, and over-power operating conditions
  • Optional Phase Locked Output eliminates the need for a matching network in many applications
  • Gain control circuitry stabilizes output power against line and load variations; limits power during high VSWR conditions

General Specifications:

  • AC input voltage:  208 or 480 VAC standard (others available), 3 phase power input; 50/60 Hz +/- 10%
  • Line current protection:  45 amps
  • Cooling:  2 GPM, 10 to 30 degrees non-condensing
  • Analog setpoint and readback levels:  0-10VDC for 0-100% rated power
  • Over-temperature fault:  Output disabled when heatsink temp exceeds 60 degrees C
  • Control signals input impedance:  100K Ohms, min
  • Control signals input isolation:  100VAC min to AC supply line
  • Control Connectors:  15 pin Subminiature D type
  • Size:  19"W x 5.25"H x 24"D
  • Size for DC power source:  19"W x 5.25"H x 24"D
  • Weight:  350 lbs. total (includes dual power supply and DC source)

DC Section

  • Output power:  Up to 2 KW of programmable power into a 50 to 200 Ohm load
  • Output power control linearity:  1% or better
  • DC power regulation:  +/-1% of setpoint
  • Line regulation:  +/- 1% output change over 185-230VAC Line Voltage

RF Section 

  • Output power:  Up to 4 KW into a 50 Ohm load
  • Frequency:  Fixed from 20KHz to 2 MHz, with frequency agile optional capability up to 10% bandwidth
  • Frequency stability:  1%
  • Harmonic distortion:  All harmonics minimum -30dB with respect to fundamental from 10-100% output power
  • Output power control linearity:  3% or better
  • Forward power regulation:  +/-3% of setpoint for load variations within VSWR foldback limits
  • Load mis-match:  Output limited to 600 Watts under high VSWR conditions
  • Line regulation:  +/- 1% output change over 185-230VAC Line Voltage